NOW ONBOARDING

An expert electrician in your pocket. On every job.

Point your phone at the work. Ironhand sees what you see — flagging code violations, answering questions by voice, and catching mistakes before they become callbacks.

Get Early Access See How It Works
The Problem

Your best electrician can't be on every job site.

Expertise doesn't scale. That's the bottleneck — whether you're in the field or running the business.

01

Answers buried across ten sources

Part number in one app, NEC table in another. Scanning YouTube and Google for questions. Every lookup means digging — and nobody finds what they need on the first try.

02

Failed inspections and rework

Every failed inspection or rework is a return trip, a schedule hit, and margin you don't get back.

03

You can't be on every job

Your top guy's knowledge, on every job site, in real time.

How It Works

Like having a master electrician and a code book that talks back.

STEP 01

Point your camera and ask

Set your phone where it can see the work. Need a part number, wire rating, or NEC reference? Just ask out loud — hands stay on the job.

Ironhand Active — Listening
You asked"What size wire do I need for this 50-amp range circuit?"
Ironhand6 AWG copper or 4 AWG aluminum, per NEC 210.19(A)(1). Based on the Square D panel I'm seeing, you'll want the HOMT250 breaker.
STEP 02

Get flagged before it's a problem

Ironhand monitors for code violations and safety issues as you work — alerting you by voice before mistakes become rework.

Ironhand Active — Issue Found
Violation — NEC 110.14(D)Conductor appears to be aluminum on a copper-rated breaker terminal. Verify conductor material or use approved AL/CU connector.
Suggested FixIf aluminum, install an approved AlumiConn connector or replace with copper conductor rated for this amperage.
STEP 03

Finish work faster, with confidence

Before you close up, Ironhand runs a compliance review — checking wire fill, labeling, protection requirements, and more.

Ironhand — Review Complete
Pre-Inspection ReportAll circuits properly labeled - Wire fill within capacity - Ground bus verified - AFCI/GFCI confirmed for required circuits - Torque specs met on all terminations
For Contractors

Your standards, every job site.

The hardest part of growing isn't finding work — it's making sure that the work gets done right when you're not there.

Send any crew with confidence

Ironhand flags the same things you'd catch if you were on site – allowing less experienced guys to work to the highest standard.

Fewer callbacks, cleaner inspections

Issues get caught during the work — not after the inspector shows up.

Take on more work

Your crew works faster and makes fewer mistakes. That's more jobs done right with the team you already have.

Why It Matters

The math is simple.

45 min

Lost per tech per day

Stopping to look up specs, code references, and YouTube demos instead of working.

$1,200

Average cost per rework incident

Failed inspections, callbacks, and rework — labor, materials, return trips, and schedule disruption.

3-5 yrs

To build proficiency

Ironhand compresses the learning curve so your crew produces sooner.

ROI Calculator

See what Ironhand could save your team.

Your crew

Adjust to match your business

Number of electricians5
Jobs per electrician per day2
Estimated Annual Savings
$0
per year

Breakdown

Fewer failed inspections$0
Reduced callbacks and rework$0
Time recovered (billable hours)$0

Based on 250 working days/year. Assumes 40% of jobs require inspection, 8% inspection fail rate, 5% callback rate, 40% reduction with Ironhand, $300 avg failed inspection cost, $1,200 avg callback cost, $45/hr billable rate, 45 min saved per tech per day.

Get Early Access

Built for the job site,
not the boardroom.

Whether you're in the field or running the crew, we want to hear from you.

Get early access

Tell us a bit about yourself and we'll reach out.

You're on the list.

We'll be in touch soon.

Ready to talk?

Book 15 minutes and we'll give you a call to walk you through how Ironhand works.

Book a Call